Unify OpenStage M3 User Manual

24 Conducting calls – the basic functions
Language
If your preferred language for the display texts is not set, you can set this your-
self  Page 17.
First seize the line, then dial
c or d When the handset is in idle status: Press and hold the Talk or Speakerphone key.
o Enter the number you wish to dial. The user is called.
Typing errors cannot be corrected. In case of typing errors: Press the On-hook
key.
Either:
p The user answers. You are conducting the call.
Or:
The user is busy or rejects the call. You are routed to the other party's mailbox
(if configured) or can program a callback request
 Page 26.
a Press the On-hook key to end the operation.
Dial first, then seize the line
Dialling preparation
o and possibly X Enter the required phone number and correct individual characters as neces-
sary using the "Delete" display key.
possibly # Insert a dial pause. A "P" appears between the digits entered. You may have to
insert a pause, for
example, between the prefix and the phone number or when
checking a mailbox.
Dialling
c or d Press the Talk or Speakerphone key. The user is called.
Either:
p The user answers. You are conducting the call.
Or:
The user is busy or rejects the call. You are routed to the other party's mailbox
(if configured) or can program a callback request
 Page 26.
a Press the On-hook key to end the operation.
Busy
Please replace
handset.
The dialling preparation function is also available with number redial and
when dialling from the handset's phonebook (
Ó ).
Busy
Please replace
handset.

Unify OpenStage M3 Specifications

General

Brand	Unify
Model	OpenStage M3
Category	Cell Phone
Language	English