114 Personal alarm functionality
Activating monitoring
3x w Press the centre key three times.
or
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm. The procedure for activating the alarm func-
tionality is started.
The handset immediately activates monitoring mode.
Shown on the display when the handset is in monitoring mode.
The monitoring LED on the handset flashes!
(flashing rhythm: 50 ms on/1000 ms off)
uv [ This menu option is now activated.
Unavailable functions
The following functions are not available in monitoring mode because they
would delay the alarming signal:
• Phonebook/Record Pattern
• Phonebook/Copy Entry
• Phonebook/Delete All
• Phonebook/Copy All
• "Data Transfer" menu
• "Alarm Clock" menu
• "Resource Directory" menu
• Settings/ Date/Time
• Settings/Handset/Area Codes
• Data exchange via MPM Manager
Prealarm
The prealarm signals a pending alarm. If you do not confirm this prealarm, the
handset sends emergency alarm signals to the configured location.
A prealarm is indicated with Prealarm and the relevant alarm type on the display.
The handset signals the prealarm by means of the configured warning tone.
Note:
The alarm functionality must be configured prior to initial use.
Note:
In monitoring mode: Do not remove the battery pack to ensure that moni-
toring is not interrupted.
Note:
If a prealarm is signalled during a call, you have to first confirm the
prealarm in order to prevent the pending alarm. You can then continue the
call.
To Next Page
Loading...
Need help?
General
