46 Conducting calls – enhanced functions
Making calls using identification codes
In the case of calls you make to external partners, you can enter and charge the
call costs on the basis of individuals, customers, accounts and private calls,
for
example, by means of account codes. The account code (ACCT) can contain
up to 11
characters and is included in the data printout. The ACCT is only trans-
ferred after a call has been completed. The ACCT can be entered before and
during the external call.
This function can also be called by entering the code Page 107.
c or d Press the Talk or Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
o Enter the required account code (optional).
Save the settings.
o Enter the external phone number. The phone number is dialled.
The call costs can only be assigned using call detail recording software,
which must be set up by service personnel.
If a call is transferred, the costs are still assigned to the ACCT entered.
To Next Page
Loading...
Need help?
General
