Unify OpenStage M3 User Manual

14 Putting the handset into service
Inserting the battery
Insert the battery pack (at an angle, nose first and the contacts facing down).
Then press it down into the compartment until the battery pack's positioning clip
firmly snaps into place.
Closing the battery compartment
1. Replace the battery cover at the bottom of the housing into the recesses.
2. Then press down the battery cover until it rests firmly on the seal.
3. Insert and tighten the Allen screw.
1
2
3
1
2
3

Unify OpenStage M3 Specifications

General

Brand	Unify
Model	OpenStage M3
Category	Cell Phone
Language	English