20
Reference
Guide Setup mode
Scroll between choices by pressing the left
button ( ). Select and move to next setup
screen by pressing the right button ( ).
MAX RANGE SETUP
If UniTire is set to operate in analog mode, it is
necessary to set the maximum pressure value
you wish to display.
You want to have the maximum range value as
low as possible to make the scale as detailed
as possible. This provides resolution between
the lines and easier pressure adjustment while
using the analog scale.
UniTire can measure pressure values up to
5 bar even if the max range is set to a lower
value.
Scroll between choices by pressing the left
button ( ). Select and move to next setup
screen by pressing the right button ( ).
STEALTH MODE SETUP
This is where you choose if you want to use
the Stealth mode when measuring and storing
tire pressure in Sequence mode.
Set Stealth mode to On if you want to hide
pressure values.
Scroll between choices by pressing the left
button ( ). Select and move to next setup
screen by pressing the right button ( ).
STEALTH TARGET SETUP
When Stealth mode is enabled, 2 or 4 more
screens are shown, depending on the chosen
sport.
This is the hidden target pressure value for
each tire.
Increase the target value by pressing the left
button ( ). If you keep pressing the left but-
ton (
3
), the value will increase faster.
To change between increasing and decreasing
the pressure target, just press the left button a
little longer (
1
).
The direction is indicated by the small arrow.
To start from zero, press the right button a
little longer (
1
).
Select and move to the next setup screen by
pressing the right button ( ).
To Next Page
Loading...
Need help?
General
