Unipro UniTire V2 User Manual

IV
SALES AND SERVICE IN
DENMARK
Unipro ApS
Viborg Hovedvej 24
DK-7100 Vejle
Denmark
Tel +45 7585 1182
mail@uniprolaptimer.com
www.uniprolaptimer.com
www.facebook.com/uniprolaptimer
www.instagram.com/uniprolaptimer
INTERNATIONAL DEALERS
You can nd our International dealers on the
web site:
www.uniprolaptimer.com
DESIGN AND PRODUCTION
Designed and manufactured in Denmark by
Unipro ApS.
The UniTire pressure gauge was designed by
Palle Schultz, Denmark:
www.palleschultz.dk
Unipro reserves the right to make changes and
improvements to any of the products described
in this document without prior notice.
Part numbers:
17-02-001 UniTire V2 (black)
17-02-002 UniTire V2 (dark blue)
17-02-003 UniTire V2 (red)
17-02-004 UniTire V2 (silver)
All part numbers are including a protection
cover.
Spare part numbers:
17-03-030 Button for UniTire handle
17-03-031 Button for UniTire display
17-03-033 Two M4 x 12 stainless screw
17-03-034 Gasket for UniTire handle
17-03-036 Junction cable UniTire
ABOUT THIS USER GUIDE
This guide was written and produced by
Unipro ApS.
UniTire V2 User Guide version 2.00
Made for UniTire V2 rmware version 1.0x.
COPYRIGHT
Copyright © 2022 Unipro ApS
Copyright and acknowledgementsAbout

Unipro UniTire V2 Specifications

General

Brand	Unipro
Model	UniTire V2
Category	Measuring Instruments
Language	English