Unipro UniTire V2 User Manual

19
Reference
Guide
Setup mode
ENTER SETUP MODE
You enter Setup mode by pressing both the
left and right buttons at the same time
(
3
+
3
).
You can also do this to go directly to Setup
mode when turning UniTire on.
GENERAL FUNCTIONS
In Setup mode you use the right button ( )
to accept the value, store it in the memory and
move on to the next setup screen.
You use the left button ( ) to scroll through
choices, and to change or adjust the current
setting.
When you are nished with the setup, you can
return to the previous mode by pressing and
holding both the left and the right buttons
(
3
+
3
) or turning UniTire off by pressing
and holding the right button (
3
).
All settings are stored and will not be cleared,
even if you remove the batteries.
SPORT SETUP
UniTire can be used for all sports where tire
pressure measurements are needed. Choose
your sport - or a sport with the same number
of wheels as your sport.
The “SET SPORT screen” will list the pre-
dened sports.
Scroll between choices by pressing the left but-
ton ( ). Select and move to the next setup screen
by pressing the right button ( ).
When the sport is changed, overwriting values
needs to be conrmed on the next screen.
SEQUENCE SETUP
This is where you dene which order to mea-
sure your tires in.
The “SET SEQUENCE screen” will list all the
possible combinations of tires.
Scroll between choices by pressing the left
button ( ). Select and move to the next setup
screen by pressing the right button ( ).
GAUGE MODE SETUP
UniTire can display in either digital or analog
gauge view. The digital view has more details,
while the analog view is more simple and has
the looks of an old fashioned analog pressure
gauge.
The “GAUGE MODE screen” gives you the
choice between Digital and Analog view.

Unipro UniTire V2 Specifications

General

Brand	Unipro
Model	UniTire V2
Category	Measuring Instruments
Language	English