HID-POS
The HID-POS interface is recommended for
new application programs. It can send up to
56 characters in a single USB report and
appears more efficient than USB HID-KBW.
Features:
²
HID based, no custom driver required.
□ Way more efficient in communication than USB
HID-KBW and traditional RS-232 interface.
Note: HID-POS does not require a custom
driver. However, a HID interface on Windows
98 does. All HID interfaces employ standard
driver provided by the operating system. Use
defaults when installing the driver.
HID-POS
W070903
PS/2 Interface (Hardware Version: V2 or higher)
When the scanner is connected to a host device through
its PS/2 interface, users need to scan the following
barcode to enable the PS/2 port.
PS/2-KBW
W100910
To switch from PS/2 to RS-232, scan the barcode
below.
RS-232
W100900
To Next Page
Loading...
