Enable 2-Digit Add-On Code/ Enable 5-Digit Add-
On Code: The scanner decodes a mix of EAN-13
barcodes with and without 2-digit/5-digit
add-on
codes.
Disable 2-Digit Add-On Code/ Disable 5-Digit Add-
On Code: The scanner decodes EAN-13 and
ignores the add-on code when presented with an
EAN-13 plus add-on barcode. It can also decode
EAN-13 barcodes without add-on codes.
Transmit System Character
The first character of UPC-E barcode is the system
character
W306A10
Do Not Transmit System
Character
W306A20
*Transmit System Character
To Next Page
Loading...
