RS-232 Host Types
To select an RS-232 host interface, scan one of the following barcodes.
1
Scanning Standard RS-232 activates the RS-232 driver, but does not change port settings
(e.g., parity, data bits, handshaking). Selecting another RS-232 host type barcode changes
these settings. The CUTE host disables all parameter scanning, including Set Defaults. If
you inadvertently select CUTE, scan *Enable Parameter Barcode Scanning, and then
change the host selection.
21
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
To Next Page
Loading...
