Unitech MS842 Series - QR Inverse; Microqr; Aztec

QR Inverse
This parameter sets the QR inverse decoder setting. Options are:
z Regular Only - the decoder decodes regular QR barcodes only.
z Inverse Only - the decoder decodes inverse QR barcodes only.
z Inverse Autodetect - the decoder decodes both regular and inverse QR
barcodes.
MicroQR
To enable or disable MicroQR, scan the appropriate barcode below.
Aztec
To enable or disable Aztec, scan the appropriate barcode below.
62
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.