z Length Within Range - Select this option to decode a Codabar symbol with a
specific length range. Select lengths using numeric barcodes in the appendix of
Numeric Barcodes. For example, to decode Codabar symbols containing
between 4 and 12 characters, first scan Codabar - Length Within Range.
Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To
correct an error or change the selection, scan Cancel.
z Any Length - Scan this option to decode Codabar symbols containing any
number of characters within the decoder’s capability.
MSI
Enable/Disable MSI
To enable or disable MSI, scan the appropriate barcode below.
55
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
To Next Page
Loading...
