Connecting a USB Interface, Dongle Mode (for MS842P)
Dongle Mode (with SCM support)
In order to establish a proper connection between your computer and a scanner
through a dongle, we suggest that you follow these step-by-step instructions:
1. Turn on your computer or laptop PC.
2. Insert a dongle into a USB port of the
computer or laptop PC.
3. Scan the MAC address of the dongle by
using the MS842P scanner.
4. When being successfully connected to
the dongle, the scanner will beep shortly
one time with a high tone.
5
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
To Next Page
Loading...
