UPC-E1 Preamble
Preamble characters are part of the UPC symbol, and include Country Code and
System Character. There are three options for transmitting a UPC-E1 preamble to
the host device: transmit System Character only, transmit System Character and
Country Code (“0” for USA), and transmit no preamble. Select the appropriate
option to match the host system.
EAN-13/JAN-13
Enable/Disable EAN-13/JAN-13
To enable or disable EAN-13/JAN-13, scan the appropriate barcode below.
Bookland EAN
Enable/Disable Bookland EAN
To enable or disable Bookland EAN, scan the appropriate barcode below.
Note:
If Bookland EAN is enabled, select a Bookland ISBN Format. Also select either Decode
UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979
Supplemental Mode in Decode UPC/EAN/JAN Supplementals.
48
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
To Next Page
Loading...
