Unitech MS842P User Manual

38
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Video View Finder
Select Enable Video View Finder to project the video view finder while in Image
Mode, or Disable Video View Finder to turn the video view finder off.
Mirrored Image
Enable this to scan images in reverse, or mirrored, as if seen through a mirror. This
mode is useful in applications requiring scanning through a mirror and using
symbologies that do not decode in reverse.
Enabling this mode when using snapshot, video, or video viewfinder mode
transmits images as mirrored images.
Beep After Good Decode
Scan a bar code below to select whether or not the decoder issues a beep signal
after a good decode. If selecting Do Not Beep After Good Decode, beeper signals
still occur during parameter menu scanning and to indicate error conditions.

Unitech MS842P Specifications

General

Type	Handheld bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Tilt reading angle	-60 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 25 (IR 2 of 5), Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), JAN, MSI, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
USB version	2.0
Wireless range	10 m
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Certification	CE, FCC, BSMI, VCCI
Product color	Black, Grey, Yellow
Housing material	-
International Protection (IP) code	IP54
Battery life	10 h
Charging time	4 h
Input voltage	5 V
Battery capacity	1620 mAh
Power consumption	400 mA
Power source type	DC
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	74 mm
Width	89 mm
Height	176 mm
Weight	200 g
Base dimensions	73 x 95 x 200 mm