Unitech MS852B Plus - Page 109

-93- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
3.2.10.3 UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data. Default
= Off for both 2 Digit and 5 Digit Addenda.
3.2.10.4 UPC-A Addenda Required
When Required is scanned, the scanner will only read UPC-A bar codes that
have addenda. You must then turn on a 2 or 5 digit addenda. Default = Not
Required.
Not Required*
Required
2 Digit Addenda Off*
2 Digit Addenda On
5 Digit Addenda Off*
5 Digit Addenda On