Unitech PA500 User Guide

Chapter 1 Introduction4
PA500 Tour
The following section gives you a tour of the PA500 hardware interface.
Front View
No. Component Description
1 Power button If the device is off, press this button to turn it on.
Alternatively, when the unit is on, this key must be
pressed and held down for about two seconds in
order to turn the device off.
2 LCD Touch screen Displays the applications and data stored on your
device. It is touch-sensitive and responds to the
stylus or finger.
3 Navigation key Press the Action button, center of the navigation
key, to access the menu options and confirm your
selection.
Use the up, down, left, and right arrow keys to
navigate through the menu options.
4 Email button Launch Microsoft Outlook Express.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm