Unitech PA500 User Guide

55
Chapter 4 Managing Programs
This chapter describes the procedures for launching programs. It also
shows how to use the Scan2Key and Scanner Setting accessory programs.
Accessing Programs
Opening a Program
You can open programs in any one of the following ways:
• Tap a program name from the Start menu.
• You can select which programs are displayed on the Start menu. For
instructions, see Adding a program to the Start menu on page 71.
• Tap Start, then Programs to see more programs.
Switching Between Programs
• Select another program from the Start menu.
NOTE: To get detailed information on using any of the applications on
your device, tap Start > Help.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm