Unitech PA500 - Scanner Settings

57
To exit Scan2Key:
1 Tap and hold the Scan2Key icon then tap Exit on the pop-up menu.
The Quit Scan2Key dialog box appears.
2Tap Yes.
Scanner Settings
When it is necessary for the user to change the default barcode symbology
for a different application, the Scanner Control Panel provides the ability to
change default symbology. The Scanner Control Panel also lets you place
delimiter characters behind scanned data and save the settings.
To view the default barcode symbologies:
1 Tap Start > Settings.
2 On the System tab, tap Scanner Settings.