Unitech PA500 User Guide

11
To charge the device using the docking station:
(1) Plug the AC adapter cable into the power jack on the docking
station.
(2) Connect the AC adapter into an electrical outlet.
(3) Slide the device into the docking station until it clicks into place.
The connection is secure when the bottom edge of the device is
aligned smoothly with the docking station, and the LED indicator
on the device lights up red.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm