Unitech PA600 User Manual

C H A P T E R 6
B A S I C I N V E N T O R Y F U N C T I O N S
43
The PA600 will attempt a connection with the Omni Server, to retrieve Store name and
Item Number Justification data.
Now you can enter your employee number, followed by the ENTER key on the PA600.
You will then be prompted for your password. Enter it followed by the ENTER key on
the PA600.
If you do not have a password, you can simply press the ENTER key on the PA600.
The system will then check to see if your entries are valid, and that you have rights to
changing inventory quantities. If your credentials check out, you will be ready to scan
barcodes and enter quantities.
Collecting Purchase Order Data
You will now be prompted to enter an item number, which you can do by scanning, or
by manual entry. You can also enter a vendor order number or a base matrix number
here as well. Once you enter an item number, you will see current on hand, bin location,
cost and price information for the selected item.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm