5
OPERATIONS MANUAL Rev. 1.4
Always check and ensure that the machine and its accessories (hoses, cables,
fittings, spray handle, nozzle etc.) are in good working condition before start-up.
The maximum permissible pressure and temperature are printed on the high-
pressure hose. In case of damage, replace immediately with original approved
hoses.
If during operation you observe any leakage, abnormal noise or any other
malfunction, stop the machine and get it serviced.
You should not attempt to repair and reuse damaged high-pressure hoses.
You should only use original spare parts and accessories.
You should carry out only the maintenance works described in this manual and
use only original parts approved by the manufacturer.
Do not make any modifications to machine and ensure it is regularly serviced as
per its maintenance schedule.
Repair works to be carried out by qualified personnel only.
Never suck up solvent liquids such as thinners, petrol or oil as the resulting spray
is highly inflammable, explosive and toxic.
Always ensure the machine is placed in a stable position and cannot move.
Do not operate the machine without water or with insufficient quantity of
water, as such shortages may result in damage of the pump.
Do not cover the machine and ensure adequate air circulation.
Always store the machine in places where it will not be exposed to frost.
Use only original spare parts for maintaining the machine. Repairs should be
done only by qualified personnel.
After works, the machine should be stored not being exposed to harsh and
corrosive environment and secured against unauthorized use.
Never exceed the maximum working pressure of the machine!
To Next Page
Loading...
