EasyManua.ls Logo

Unitor HPCE DYNAMIS 500+ - Introduction

Unitor HPCE DYNAMIS 500+
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
OPERATIONS MANUAL Rev. 1.4
Introduction
This manual or part of it should not be reproduced without the written approval of the manufacturer.
Every effort has been made to ensure that the information in this manual is both accurate and current.
However, we reserve the right to change, alter or otherwise improve the product and its documentation
at any time without prior notice.
Manufacturer’s warranty is limited to repair or replacement of faulty parts at the time of manufacture.
To maintain the machine in perfect condition, it is important that the periodical maintenance procedure
is performed.
Warning
Please carefully read this manual before starting the machine for the first time and
keep this manual in a safe place. We cannot be held responsible for damages or
malfunctions due to not reading this manual.
This machine is a high-pressure water jetting equipment which produces a water jet under high pressure
and can cause severe injuries. Complete understanding of this manual is absolutely necessary to prevent
injuries and damages to persons, objects and/or the equipment.
This manual includes basic information that has to be respected at all times concerning the installation,
start up, operations and maintenance of the machine. It has to be therefore read carefully by the
operator and should always be on site.
Attention
ABSOLUTELY NO PERSON OR ANY BODY PART SHOULD BE BETWEEN THE
MACHINE/SPRAY LANCE AND THE TARGET AREA FOR CLEANING WHILE THE MACHINE
IS IN OPERATION. THERE IS NO SAFE DISTANCE FOR TOUCHING OR FEELING THE HIGH-
PRESSURE WATER JET WITH HUMAN BODY PARTS.

Related product manuals