2023 Unitree Robotics. All rights reserved.
Storage, Transportation, and Maintenance
Storage
The storage temperature range for the L1 is -20℃~60℃. Please store it in a dry and dust-free envi-
ronment, and pay attention to the following:
· Do not expose the product to toxic, harmful, or corrosive environments.
· Handle the product with care when storing, and avoid dropping it.
· For devices stored for more than three months, regularly check the appearance and interfaces to
avoid abnormal conditions when using.
Transportation
Before transportation, please carefully check whether the product is securely installed and then
pack it in the packaging box. It is necessary to put buffer foam in the packaging box, and ensure
that the packaging box is dry and clean, without moisture. During transportation, handle the prod-
uct with care, avoid collision, impact, or dropping.
Maintenance
The L1 has good reliability and stability, and under normal use, the probability of failure is small. It
only requires cleaning of the optical window of the laser ranging instrument. If the output area of
the radar is contaminated (such as dust, mud, etc.), it may affect the quality of the data generated
after scanning objects. In this case, it is necessary to clean the radar. Please follow the following
steps to clean it:
First, use a clean lens cleaning cloth to gently wipe the optical window. If there are still visible stains
on the window, then use a small amount of alcohol on the cleaning cloth to gently wipe the
window.
12
To Next Page
Loading...