Universal Audio Apollo Twin X User Manual

Apollo Twin X Hardware Manual Quick Start 17
Connect to Input Sources and Monitor System
One typical Apollo Twin X audio setup is illustrated below. For complete details about all
of Apollo Twin X's connectors and controls, see Controls & Connectors.
Typical Apollo Twin X audio connections. In this example, the mic is connected to channel 2,
so the mic and the instrument (which connects to channel 1) can be used at the same time.
Stereo
Speaker System
Hi-Z
Instrument
Headphones
Microphone
MIC/LINE 1 MIC/LINE 2
3 L
4 R
LINE OUT MONITOR
OPTICAL IN
OFF ON
12VDC
POWER

Universal Audio Apollo Twin X Specifications

General

Type	Audio Interface
Connectivity	Thunderbolt 3
Headphones	1 x 1/4"
AD/DA Conversion	24-bit/192kHz
Simultaneous I/O	10 x 6
Number of Preamps	2
Input Channels	2
Output Channels	4
UAD Plug-in Support	Yes
Monitor Outputs	2
Inputs	2 x XLR/TRS combo, 1 x Hi-Z Instrument
Outputs	2 x Monitor, 2 x Line
Phantom Power	Yes
Weight	2.35 lbs
Digital Inputs	1 x Optical Toslink (ADAT/SPDIF)
UAD Plug-in Processing	Realtime UAD Plug-in Processing
Included Software	Realtime Analog Classics Plus plug-in bundle
Operating System	Mac, Windows
Thunderbolt Connectivity	Yes (Thunderbolt 3)
DSP Processing	UAD-2