Apollo Twin X Hardware Manual 30
Specifications
All specifications are typical performance unless otherwise noted. Tested with the Audio
Precision APx555 Audio Analyzer under the following conditions: 48 kHz internal sample
rate, 24-bit sample depth, 20 kHz measurement bandwidth, balanced input & output
(except single-ended headphone output), and internal clock.
SYSTEM
I/O Complement
Microphone Inputs Two
High Impedance (Hi-Z) Instrument Inputs One
Analog Line Inputs Two
Analog Line Outputs (DC coupled) Two (four including Monitor outputs)
Analog Monitor Outputs (DC coupled) Two (one stereo pair)
Headphone Output One stereo
Digital Input One (ADAT or S/PDIF, selectable)
Thunderbolt 3 Port One
A/D – D/A Conversion
Simultaneous A/D conversion Two channels
Simultaneous D/A conversion Six channels
Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
Bit Depth Per Sample 24
Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
Analog Round-Trip Latency through four UAD
legacy plug-ins (included) via Console software
1.1 milliseconds @ 96 kHz sample rate (no
additional latency via Realtime UAD Processing)
(continued)
To Next Page
Loading...
