How to adjust digital input levels on Universal Audio Recording Equipment?
Signal levels for digital inputs on Universal Audio Recording Equipment are adjusted at the device connected to those inputs. If desired, UAD plug-ins can be used to add signal gain.
Why are various LEDs inside the Universal Audio Apollo Twin blinking?
The blinking of various LEDs inside the Universal Audio Recording Equipment unit is normal operational behavior and can be safely ignored.
General| Type | Audio Interface |
|---|---|
| Phantom Power | Yes |
| A/D Resolution | 24-bit |
| DSP | Yes |
| Number of Preamps | 2 |
| Line Inputs | 2 |
| Line Outputs | 2 |
| Output Channels | 6 |
| Monitor Outputs | 2 |
| Analog Outputs | 2 TRS |
| Headphones | 1 |
| Sample Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Operating System | Mac, Windows |
| Preamps | 2 |
| DSP Processing | Yes |
| Connectivity | Thunderbolt |
| Analog Inputs | 2 XLR/TRS combo |
Provides contact information and methods for obtaining technical assistance.
Guides on connecting and powering the Apollo Twin hardware unit.
Details system requirements, software installation, and registration processes.
Explains how to adjust input gain and output volume levels on the unit.
Details channel selection, input types (Mic, Line, Hi-Z), and preamp options.
Crucial safety guidelines for using the unit, including water, heat, and ventilation.
To Next Page
