For example, you can connect with a USB-C to USB-C cable if your computer has a USB-C port.
For iOS or iPad devices, connect the interface with a USB-C cable (iPads with USB-C) or with
the Apple Lightning to USB Camera Adapter (other iPadOS and iOS devices).
For more information, see [video link].
Note: Volt is bus powered when connected to ports that meet USB 2.0 specifications. However,
some USB ports, such as those on low-quality hubs, don’t meet USB specs and cannot supply
adequate bus power. If Volt doesn’t power on, connect Volt to external 5VDC power to
compensate for the underpowered USB port.
(18) 5VDC Power
Volt is bus powered when connected to a USB port that supplies adequate power. You can use
the 5VDC connector to connect to power when required (for example, if you want to reduce
power drain on an iPad or laptop, or if the USB port or hub is not able to provide enough
power).
Tip: You can power Volt by connecting the included USB-A to barrel connector power cable to
a USB power adapter, then connecting the barrel plug to this power inlet on Volt.
To Next Page
Loading...
