Page 2
MX-900 OWNER’S MANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the MX-900 can
control your system without being in line-of-sight of the equipment.
3. The MRF-300’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-300.
4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
components. The Flashers relay commands
to components out of sight of the MRF-
300’s Front Blaster. The flashers plug in to
the MRF-300’s rear flasher line outputs via
their 10 foot cables. Uniquely, the MRF-300
can also connect to rear panel IR Inputs via
its adjustable IR Line Outputs.
2. The RFX-150 RF Sensor can be freely
positioned for optimal reception.
Either the MRF-300 or the MRF-250 RF base station is compatible with the
MX-900. Both incorporate RF addressing. RF Addressing gives you the ability to
control equipment locations throughout your home, even if they are concealed
in other rooms or are behind closed doors.
1. The MX-900 sends radio waves
in every direction, so you don’t
have to point the remote any-
more!
To Next Page
Loading...
Need help?
General
