MSC-400 Reference Manual
Rev 4
82
remote ‘keyboard’ will return to PC PAGE 1 for selection of the next letter. (If the user preference is to
navigate the letters manually, omit the GOTO PAGE INSTRUCTIONS in STEPS 10-11.)
16. Repeat STEPS 8-14 for PAGES 3-5, until all LETTERS and a SPACE COMMAND have been added
to the PC DEVICE.
17. SAVE the PROJECT and DOWNLOAD to the REMOTE. See Section: SAVING AND
DOWNLOADING A MX/TX PROJECT for additional information.
NOTE - The Media Server PC must be connected to the USB2 Port on the MSC-400 Rear Panel.
To Next Page
Loading...