Unox XFT LineMiss User Manual

English
160 cm
Starter Kit
art. ED1271A0
Anchoring
Before anchoring on a UNOX substructure or on one of your own, always check that the sub-
TUSVDUVSFJTQFSGFDUMZøBUVTJOHBTQJSJUPSEJHJUBMMFWFM*GOPUUIF6/09TVCTUSVDUVSFDBOCF
levelled by adjusting the feet. Beware - do not completely unscrew the feet.
Anchoring on UNOX substructures
The stacking kit is available for anchoring an oven on top of a UNOX prover. Follow the instructions on the steam
condenser packaging for their assembly.
For anchoring on an open stand please see the gure below.
For safety reasons, the last tray should
NEVER be placed at a height greater
UIBODN
If necessary to do so, it is mandatory to
post the sticker contained in the "Starter Kit" at
the height shown in the gure.
1
2
x4
3
4
Use only the UNOX wheel kits to move
proovers or open stands by following the
instructions on the kits packaging.


Unox XFT LineMiss Specifications

General

Brand	Unox
Model	XFT LineMiss
Category	Oven
Language	English