Using mod. Dynamic - Matic - Classic
The LineMiss™ models are used by pressing the screen-printed keypad.
Press only with ngers and no other objects, such as knives, forks, etc...
5IJTUFDIOPMPHZNBLFTDMFBOJOHUIFDPOUSPMQBOFMRVJDLBOEFBTZXIJMFHVBSBOUFFJOHNBYJNVNSFMJBCJMJUZBOE
durability and avoiding any type of mechanical failure.
OK
The LineMiss™ models can be used in MANUAL or PROGRAMMED mode.
MANUAL mode requires the user to set the parameters listed in the table for each cooking cycle; these param-
eters are NOT saved and must be input for each successive cooking cycle.
Cooking Parameters
Dynamic - Matic Models Classic Models
RANGE
cooking time cooking time
GSPNUPIPVSTBOE
PWFODBWJUZUFNQFSBUVSFGSPN¡$UP¡$ oven cavity temperature
GSPN¡$UP¡$
QFSDFOUBHFPGTUFBNTVQQMZSTEAM.Plus
not present
GSPN0''UP
Operation in PROGRAMMED mode allows
one program to be saved for use during successive cycles.
Each
program
contains 4 phases:
- PHASE 1: initial pre-heating;
- PHASES 2 ->4: up to 3 cooking steps, each characterized by dierent cooking parameters. Cooking does not
necessarily require all three STEPS: set only those required.
5IFBQQMJBODFBVUPNBUJDBMMZQBTTFTGSPNPOFDPPLJOHQIBTF45&1UPUIFOFYU
STEP 1
PRE-HEAT
cooking
parameters
cooking
parameters
cooking
parameters
1h:30 min
200°C
20% steam
-
180°C
-
STEP 2 STEP 3
30 min
100°C
60% steam
not used
EXAMPLE OF SETTING A COOKING CYCLE
- When the oven is connected to the power supply, the control panel switches on automatically.
- Button functions :
TJOHMFSFQFBUFEQSFTTJOHJODSFBTFTEFDSFBTFTUIFWBMVFPOFVOJUBUBUJNF
IFMEEPXOJODSFBTFTEFDSFBTFTUIFWBMVFSBQJEMZ
- *GOPCVUUPOJTQSFTTFEXJUIJONJOVUFTBOEUIFSFJTOPPQFSBUJOHBQQMJBODFDPOOFDUFEUPUIFDPOUSPMQBOFM
PGUIFTBNFPWFOPSQSPWFSUIFFMFDUSPOJDDPOUSPMTHPJOUPTUBOECZNPEFPOMZUIF45"354501 LED re-
mains lit. Simply press the 45"354501 button to reactivate the electronic controls.
English
22