To Next Page

To Previous Page

Machine Settings - WIFI Connection

Connecting to the UP mini 2 through WIFI requires a Wireless Local Area Network

(WLAN). Computer and printers must connect to the same WIFI network (same SSID)

before able to communicate.

In order to acheive stable WIFI connection, users are recommended to connect under

a capacious WIFI environment. A crowded network or an area with a large number

different networks are known to cause interruption during data trasnfer.

Questions and Answers:

Need help?

Do you have a question about the UP mini 2 and is the answer not in the manual?

UP mini 2 Specifications

General

Build Volume	120 x 120 x 120 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Print Material	ABS, PLA
Connectivity	USB, Wi-Fi
Heated Bed	Yes
Enclosure	Yes
Touchscreen	Yes
Print Technology	FDM (Fused Deposition Modeling)
Print Speed	Up to 100 mm/s
Power Requirements	100-240V, 50-60Hz
Weight	8 kg