To Next Page

To Previous Page

Print Preference 2-2

No Raft: print without raft.

No Support: print without support

Stable Support: Support structure will be stronger but less easy to be removed.

Unsolid Model: The software will autofix nonsolid models

Thin Wall: The Software will detect wall thickness that is too thin to print and expand

the feature to a printable size.

Preheat: Preheat to target temp, or for 15 mins maximum.

Questions and Answers:

Need help?

Do you have a question about the UP mini 2 and is the answer not in the manual?

UP mini 2 Specifications

General

Build Volume	120 x 120 x 120 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Print Material	ABS, PLA
Connectivity	USB, Wi-Fi
Heated Bed	Yes
Enclosure	Yes
Touchscreen	Yes
Print Technology	FDM (Fused Deposition Modeling)
Print Speed	Up to 100 mm/s
Power Requirements	100-240V, 50-60Hz
Weight	8 kg