UP3D P55D - Product Technical Specifications

57 58
/Product Technical Specifications
12
The basic parameters of the UP3D Intelligent Five-Axis Dental Milling Machine
P55D are as follows:
Dry Processing
Zirconia, Wax, PMMA, PEEK, Composite Resins,
Cobalt Chromium Alloys
Disc: Thickness 10-30mm / Diameter 98.5mm,
Block: 40*20*20mm (Max)
Inlays, Anatomy Crowns, Open Cusps,
Inlays, High Inlays, Veneers, Sleeve Crowns,
Bases, Grinding Tooth Pads, Full Dentures, etc.
Machine base made of solid aluminum casting
5 Axes
Precision ball screw drive, Precision guide rail
with repeatability accuracy of ±0.003mm
A-axis: 360°, B-axis: ±33°
High-resolution full servo drive system
LED lighting inside the working chamber,
additional status display
1.0KW（max）
High-frequency electrical spindle, automatic
tool change, no need for air supply
60,000 rpm（max）
Φ4
P55D Technical Specifications
Application:
Processable Materials:
Material Specifications:
Indications:
Structure:
Number of Axes:
Linear Axes X/Y/Z Axis:
Rotational Axes A/B Axis:
Control System:
Lighting Device:
Equipment Power:
Type:
Speed:
Tool Shank Clamping Diameter:
Power:
Tool Change:
Voltage:
Dust Extraction:
Data:
Operating Temperature Range:
Operating Air Humidity:
Dimensions:
Weight:
CAM Software:
0.8KW（max）
Tool magazine accommodates 13 tools,
tool length can be measured and tool
breakage checked with precision tool setter
100VAC~130VAC、200VAC~240VAC
(selectable） 50～60Hz
Filtration Level: M,
Suction Flow Rate: 2500L/min
Wi-Fi, USB, Ethernet ports
10 °C ~ 35 °C
Below 80% (relative), non-condensing
Length*Width*Height=560×442×704 (mm)
106KG
UPCAM、Millbox