2.1 Expected usage
/General instructions
02
This product is specifically designed as a cutting device for dry dental process-
ing and is intended solely for dental use. It should not be used for any other
purpose. The equipment is capable of cutting dental materials, including but
not limited to zirconia oxide, PMMA, PEEK, wax, composite resin, and soft
cobalt-chromium alloy, for the fabrication of dental crowns, inlays, bridges, and
other oral restorations.
Simply install the UPCNC software on your computer and connect it to the
machine to easily produce high-quality dental restorations. For more informa-
tion about this machine, please visit our company's official website: https://w-
ww.UP3Ds.com/。
- Before installing, maintaining, or operating the machine, please carefully read
the equipment user manual provided with the machine.
- If you are still unsure how to operate the machine, please refrain from using it
and contact technical support for assistance.
- Ensure that each user has timely access to operating instructions and guide
each user to operate the machine safely and correctly.
- Do not remove the machine's casing without authorization, as improper
handling may result in electric shock risks.
- Contact with live parts may lead to electric shock, hence avoid operating in
moist environments to reduce this risk.
- Do not touch internal machine components with wet or damp body parts to
ensure personnel safety.
- Ensure the machine's circuits have functioning ground fault protection devices
installed and properly grounded.
- Arrange power cables reasonably to avoid cutting or damaging them.
- Before powering on the machine, always check for cable damage and ensure
the main power switch is turned off before unplugging the power cable.
- Do not perform any troubleshooting operations while the machine is running;
only trained technical personnel should carry out disassembly and repairs.
2.2 Operator requests
Only personnel who have undergone professional training, possess sufficient
knowledge and experience, are familiar with relevant regulations, capable of
executing delegated tasks, and can independently identify and avoid potential
hazards are permitted to operate this equipment.
2.3 Instructions before use
2.4 The machine's operation is incorrect
2.4.1 Electrical Safety Precautions
Important Note:The manufacturer assumes no responsibility for damage caused
by the following reasons:
- Disregard or neglect of this user guide
- Intentional misuse
- Use for unauthorized purposes
- Operation by untrained personnel
- Use by non-professionals (e.g., during maintenance work)
- Technical alterations to the equipment without consultation with the manufacturer
- Use of unauthorized accessories
03 04
To Next Page
Loading...