59 60
/Storage and Transportation
13
13.1 Storage
- Avoid direct sunlight.
- Do not expose to rain.
- Equipment should be used in the following environmental conditions:
① Temperature: 10°C to 35°C
② Humidity: Below 80% (relative humidity), without condensation
13.2 Transportation
- Transport the machine flat, preferably in its original packaging.
- Avoid severe vibrations.
- If the equipment is transported in cold or humid conditions, upon arrival at the
customer's location, it should be placed indoors to reach thermal equilibrium
with room temperature before use.
- Otherwise, there may be risks of overcooling or excessive humidity, leading to
short circuits.
Dear valued customer,
[Customer Signature]
If you require technical support, please scan the QR code below, and we will provide
you with professional guidance and technical assistance.
Date:___________________
Upon receiving the product, please take the time to carefully review the contents
of this document. If you have any questions, concerns, or need further support,
please contact us immediately. We will promptly assist you. Once you agree with
the above content, please sign below to confirm receipt and return this receipt
to us. Additionally, we warmly welcome any feedback or comments you may
have.
The purpose of this receipt is to ensure mutual understanding between us and
to provide a record to ensure that the delivered product/service meets your
expectations.
Thank you for choosing UP3D. We look forward to continuing to provide you with
excellent products/services.
Warm regards,
Information Retrieval Technical Support
To Previous Page