07 08
- Avoid damage to the electrical control system due to strong voltage fluctua-
tions:
- Connect the machine to a dedicated power circuit or ensure that no other
devices are connected to the circuit to avoid voltage fluctuations.
- If severe voltage fluctuations cannot be avoided, install a stabilizer to protect
the machine from the effects of strong voltage fluctuations.
- Avoid damage due to unsuitable tools:
- It is recommended to only use original tools provided by Cloud Armor Tech-
nology to ensure tool quality and compatibility.
- Use tools within the longest tool life as indicated in UPCNC to avoid poor
restoration processing.
- Avoid damage due to impact:
- Do not manually apply pressure to the spindle during operation in the
processing chamber to avoid accidental collisions leading to damage.
- Avoid equipment damage due to software incompatibility, failures, and/or
operator errors:
- Always use the latest supported application software versions to ensure
system stability and compatibility.
- Ensure your computer meets the software installation requirements, and read
the software usage documentation before installation or operation.
- After extensive testing, UPCAM and UPCNC are highly compatible with the
P55D and serve as production control software.
- Cloud Armor Technology allows the use of third-party CAM software as a
substitute for UPCAM, but no other solutions may replace UPCNC.
- If third-party CAM software is used, the machining instructions calculated by
the software developer are solely responsible for machining results.
2.5.2 UPCAM & UPCNC Software
2.5.3 Input Voltage
- It is strictly prohibited to start processing without connecting the dust collec-
tion system.
- The machine must be equipped with a "dust collection device" for sucking
processing dust.
- The machine cannot complete processing without a dust collector.
- Frequently clean up processing debris to maintain cleanliness inside the
processing chamber.
- Damages to internal components due to the lack of a dust collector require
paid repairs.
2.5.4 Dust Collection System
- The device must work on a stable workbench to ensure stability and reliability.
- During equipment transfer, prevent damage from falling, collision, strong
vibrations, or other mechanical forces.
- Do not use the equipment in environments with temperatures, pressures
beyond the requirements of the equipment.
- Do not use the equipment in environments containing flammable or explosive
materials to prevent fires or explosions.
- Keep children and animals away from the machine.
2.5.5 Equipment Movement/Usage Environment
To Next Page