Upright TL37 - Technical Specification

6
Cage Dimensions
Length 1.20m
Width 0.80m
Guard-rail Height 1.10m
Toe-board Height 0.15m
Operating Dimensions
Maximum Working Height 13.10m
Maximum Cage Height 11.10m
Maximum Outreach ( From centre of rotation ) 5.90m
Travel Dimensions
Towing Length 6.43m
Closed Width 1.48m
Closed Height 1.95m
Weight (Battery Model) 1450kg (unladen)
Operating Parameters
Safe Working Load 215 kg
Maximum Horizontal Pull 400 N
Maximum Wind Speed 12.5 ms
-1
Rotation 700°
Cage Slew 90°
Equipment
Bottom Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Top Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Flick Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Stabiliser Ram Double acting: Bore Ø 70.0 mm
Rod Ø 40.0 mm
Bottom & Top Ram Lock Valves Pilot operated over centre valves
Control Valve (Cage) Monoblock unit consisting of five
double acting spools
Control Valve (Ground) Monoblock unit consisting of four
double acting spools
Control Valve (Stabiliser) Monoblock unit consisting of four
double acting spools
Bushes Acetol resin polymer with sintered
bronze base (DX)
Pivot Pins Stainless Steel Bright Bar
To Grade BS970 303 S31 CW
TECHNICAL SPECIFICATION