2
Trailer / Superstructure / Outriggers.
This consists of a variety of welded and folded fabrications, which, where necessary,
contain bushed stainless steel pivots with grease nipples. The main components are shot
blasted and them powder coated, and the cylinders are wet painted. The machine also
includes fully automatic running gear with auto reverse and also integrated trailer lighting.
At the towing end of the machine there is a heavy duty coupling head as well as a
pneumatic jockey wheel. The maximum allowable load on the outriggers is 10.3kN and
the allowable sideway inclination is 5 degrees.
Equipment
Bottom Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Top Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Dropnose Ram Double acting: Bore Ø 60.0 mm
Rod Ø 40.0 mm
Stabiliser Ram Double acting: Bore Ø 70.0 mm
Rod Ø 40.0 mm
Basket Levelling Ram Double acting: Bore Ø 40.0 mm
Rod Ø 20.0 mm
Bottom & Top Ram Lock Valves Pilot operated over centre valves
Control Valve (Cage) Monoblock unit consisting of five
double acting spools
Control Valve (Ground) Monoblock unit consisting of four
double acting spools
Control Valve (Stabiliser) Monoblock unit consisting of four
double acting spools
Bushes Acetol resin polymer with sintered
bronze base (DX)
Pivot Pins Stainless Steel Bright Bar
To Grade BS970 303 S31 CW
Tyres 165R13C 8 Ply
TECHNICAL CHARACTERISTICS
To Next Page
Loading...
