23
To re-start, enough load must be removed from the cage so that the
alarm stops sounding.
In cases where the overload can not be immediatley removed or the cage
has fouled, then the overload override selector switch can be used to move
the platform to a safe position so that the overload can safely removed.
4. CAGE OVERLOAD.
In the event of the cage being overloaded, an audible alarm will sound and
the cage controls will cut out.
The Key, Motor Run/Deadman and a Control Lever must be
operated at the same time to effect this action
EMERGENCY CONTROLS
To Next Page
Loading...
