27
Weekly Checks.
1. Apply grease to the slew gear wheel and all grease nipples.
2. Check battery acid level, top up with distilled water if required (maximum
6mm over plates when battery is standing level), and check mains cable
wiring.
Monthly Checks.
1. Thorough machine inspection to be carried out by a trained and competent
person. (LOLER)
FOR ENGINE MAINTENANCE REFER TO MANUFACTURES GUIDELINES
The unit must have a thorough inspection carried out every 6
months in accordance with LOLER Regulations 1998 and a
Certificate of Thorough Inspection produced by a competent
person.
Always ensure the machine structure is in good, sound,
undamaged condition. Any inspection procedure is always aided
by keeping the machine clean.
NB. Do not steam clean the battery charger or electrical
components.
!
1
MAINTENANCE
Slew Drive
To Next Page
Loading...
