Upright X33RT - 3. Specifications; Specifications; General Specifications, Standard Machine X33 RT; Recommended Hydraulic Oil

3. Specifications
■
Specifications
The X33RT /X27RT se ries ma chines are scis sor-supported el evating work plat forms built to con form to
the fol low ing stan dards.
OSHA Paragraph 1910.67 Ti tle 29, C.F.R., Vehicle-Mounted El evating and Ro tating Work Plat forms - La-
bour.OSHA Para graph 1926.556 Ti tle 29, C.F.R., Aerial Lifts - Con struction.Australian Stan dard
AS1418-10(Int) 2004 Elevating Work Platforms. EN280:2001(E)
NOTE:
For further details regarding lubricants, maintenance schedules and service please refer to the
Maintenance and Repair Parts Manual for this machine.
■
General Specifications, Standard Machine X33RT
■
Recommended Hydraulic Oil
Shell Tellus 32 or Castrol AWS 32 or sim ilar.
SR3370 & SR2770 – 13184A Rev A page 3 - 1
SPECIFICATIONS X33RT
Nominal working height 12.12m 39' 2”
Roll out deck size 1200mm 48”
Drive speed (below 2.4m) 0 to 4.5kph 0 to 2.8mph
Drive speed (above 2.4m) 0 to 0.35kph 0 to 0.22mph
Safe working load - Main deck
(Roll out deck not extended)
450kg 990lbs
Safe working load - Main deck
Roll out deck extended - Roll out
deck
330kg
120kg
726lbs
264lbs
Platform size 2.73 x 1.65m 8’ 11” x 5’ 5”
Stowed height 2.7m 8' 10"
Stowed height (hand rails folded down) 2.0m 6' 6"
Overall length 3.36m 11’ 0”
Overall width 1.77m 5' 9"
Gradeability 35%
Lift time 50 seconds
Turning radius (inner) 2.38m 7’ 8”
Turning radius (outer) 4.75m 15’ 6”
Maximum wind speed (12.5m/s) 45km/h 28mph
Insulation rating Nil
Tyres - Poly filled loader lug 27" x 10.5" x 15"
Overall weight 3620kg 7964lbs
Ground clearance 350mm 13.8”
Maximum sound level at platform 86db