■
Structural Damage & Welds
Figure 7.19 - Structural Damage and Welds
Figure 7.20 - Structural Damage and Welds
Vi su ally in spect all welds for cracks, all struc tural
mem bers for de for mity, and all sheet metal for
dents that could in ter fere with ma chine op er a tion.
■
Guardrails
Figure 7.21 - Guardrails
Pay par tic u lar at ten tion to the guard rails. Make
sure the guard rails are prop erly in stalled, that all
the fas ten ers are in place, and that the swing ing
gate is in place and works properly.
■
Bubble Level
Figure 7.22 - Bubble Level
Vi su ally check to see that the bub ble level is not
dam aged, that it is full of fluid, that the bub ble does
not ex ceed the di am e ter of the cen ter black cir cle,
and the sur face on which the bub ble level is
mounted is not de formed or bent out of level.
■
Guides, rollers, and slides
Figure 7.23 - Guides Rollers and Slides
Vi su ally check slides and roll ers for wear or
dam age. Be sure that the guides are free of de -
bris and al low the slides and roll ers to move
smoothly.
page 7 - 6 Rev A SR3370 & SR2770 – 13184A
7. Daily Inspection and Maintenance
To Next Page
Loading...
