URIT 12 - Strip Insertion and Battery Issues

Used strip
Inserted
Remove the test strip
and shut off. Turn on
and repeat test with new
strip.
Inserted strip
error
Review the instruction
of Insert Strip. Remove
the test strip and shut
off. Turn on and repeat
test with new strip.
Set strip
holder error
Remove strip holder
and reset. Push it to the
end. Do not use if it is
loose or skew.
Replace
battery
Replace battery referri-
ng to the Manual. Immediately sh-
ut off once turn
on or during the
operation proce-
ss
Move the stri-
p during the
test
The meter will turn off
automatically in 4 seco-
nds if the strip is move-
d. Repeat test with new
strip.