PROGRAMMING MODE
http://www.miwiurmet.com.pl e-mail:miwi@miwiurmet.com.pl
18
5.05 DALLAS KEY PROGRAMING
P
5
0
5
Dallas key programming consist on assigned key or keys to each
user (each logical user code)
After pressing the
#
button on the LED display will be shown this
communication:
L
L
L
L
In order to assigned Dallas key to user:
• Enter logical user code,
• Confirm by pressing
#
button, LED displays this
communication:
-
-
-
-
• Attach the Dallas key to the reader,
• The keyboard should beep twice to confirm. In case of failure,
the keyboard generate warning signal, LED displays Er12. It
means that Dallas key is faulty or it is already assigned to other
user.
5.06 DALLAS KEY DELETE
This step allows you to delete Dallas key (for example if lost).
P
5
0
6
After pressing the
#
button on the LED will be shown this
communication:
L
L
L
L
In order to delete Dallas key:
• Enter logical user code,
• Confirm by pressing
#
button. LED displays 4 last chars of
key’s serial number. If user has more than one key, press
#
button to display serial number another key.
• Press and hold
#
button to delete selected key.
• If you enter wrong user code, the keyboard generates warning
signal, LED displays Er04, if you enter user code without
assigned Dallas keys, the keyboard generates warning signal,
LED displays Er08.
• After delete Dallas key, LED display this communication:
L
L
L
L
• You can enter next user code to delete another Dallas key or
press
∗
∗∗
∗
button to exit.
5.07 DALLAS KEY IDENTIFICATION
This step allows you to identify Dallas key.
P
5
0
7
Pressing the
#
button, on the LED will be shown this
communication:
-
-
-
-
In order to identify Dallas key user code:
• Attach key to the reader,
• LED displays user code assigned to this key. If key was not
assigned to any user, the keyboard generate warning signal.
• Press
#
button to exit.
6. SERVICE FUNCTIONS
6.01 SERIAL NUMBER OF THE POWE SUPPLY
P
6
0
1
Entering in to this function we are able to get known serial number
of the Power supply serving this system. Based on this number
individual opening codes are generated, that is why this number is
so important when we need to reconstruct in a paper form the
whole list of the individual opening codes.
Power supply serial number is displayed in 2 parts, because it can
be in range from 1 to 5 digits, and LED display is 4 digits.
After confirm by pressing the
#
button on the screen will be shown
less significant part of the supply serial number, for example: power
supply with serial number- 14220:
L
2
2
0
Another pressing the
#
button will show the rest part of the serial
number:
H
1
4
6.02 SERIAL NUMBER OF THE CALL MODULE
P
6
0
2
Entering in to this function we are able to get known serial number
of the call module.
Call module serial number is displayed in 2 parts, because it can be
in range from 1 to 5 digits, and LED display only 4 digits.
After confirm by pressing the
#
button on the screen will be shown
less significant part of the supply serial number, for example: for call
module with serial number 58765 LED will display
L
7
6
5
To Next Page
Loading...
Need help?
General
