Why my urmet domus STUDIO 2 plus can receive calls but not make them?
If your Urmet Domus Telephone can receive calls but cannot make them, it might be due to an incorrect Tone/Pulse switch setting. This switch needs to match the dialing mode used by your local telecom provider.
General| Brand | urmet domus |
|---|---|
| Model | STUDIO 2 plus |
| Category | Telephone |
| Language | English |
Defines the intended use of the telephone on a national analogue PSTN.
Instructions for checking packaging and contents for damage upon receipt.
Advises on optimal environmental conditions for telephone installation.
Notes on data loss potential if the phone is disconnected from the line.
Guidelines for cleaning the telephone using appropriate materials.
Lists the items included in the product packaging.
Displays the phone number, date, time, and other information.
Buttons for navigating call logs and phone book.
Buttons for speed dial access and volume adjustment.
Buttons for PBX transfer, redial, and pause.
Speed dial, incoming call indicator, dialing keys, speaker.
Buttons for deletion, VIP settings, Caller ID, and phone book.
Jacks for handset, line, and the handset itself.
Set up language, contrast, year, date, and time.
Configure local code, prefix code, ringtones, volume, and flash time.
Set pause time and DTMF/Pulse dialing mode.
Resets the phone to default factory settings.
Basic call handling, answering, ending calls.
Switching between handset/speakerphone and call holding.
Using the phone with a PABX system and redialing.
Storing and dialing speed dial numbers and using prefix codes.
Viewing incoming calls and removing entries.
Dialing back from Caller ID and managing VIP numbers.
Managing phone book entries: storing, viewing, and deleting.
Making calls directly from stored phone book contacts.
To Next Page