USR IOT USR-N510 - Features; Identity Packet Function

USR-N510 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
19
2.4. Features
2.4.1. Identity Packet Function
Figure 19 Identity Packet application diagram
Identity packet is used for identify the device when module works as TCP client/UDP client. There are two
methods for identity packet.
 Identity data will be sent when connection is established.
 Identity data will be add on the front of every data packet.
User can set N510 with Identity Packet function by web server as follow:
Figure 20 Identity Packet