14
INSTALLINGYOURROOMHEATER
Youhavealready madetheimportantdecisionofchoosingyourU.S.StovePelletBurningRoomHeater;
now your next step is to determine where to install your new pellet stove heater. To get the most
efficientuseofre‐circulatedheat,youshouldconsideraroomthatiscentrallylocatedwithinyourhome.
Choosearoomthatislargeandopen.
It isExtremely Importanttomaintain proper clearancesfrom any combustible surfacesormaterials in
theroomwhereyourheaterwillbelocated.Youcanfindproperclearancemeasurementsonpage13of
thismanualandontheratinglabelofyourpelletstove.
The pelletstove canbevented through anexteriorwall or into anexistingmasonry or metalchimney.
Thechimneymustbelinedifitisover6”(150mm)indiameterorifithasacross‐sectionalareaofover
28 square inches (711mm
2
). Venting can pass through the ceiling and roof if approved pipe is used.
Wherepassagethroughawall,orpartitionofcombustibleconstructionisdesired,theinstallationmust
conformtoCAN/CSA‐B365
DONOT OBTAINCOMBUSTION AIRFROMTHEATTIC,GARAGEOR ANYOTHER UNVENTILATEDAREA.
YOUMAYOBTAINCOMBUSTIONAIRFROMAVENTILATEDCRAWLSPACE.
DONOTINSTALLAFLUEDAMPERINTHEEXHAUSTVENTINGSYSTEMOFTHISUNIT.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER HEATER, FURNACE OR
APPLIANCE.
INSTALLVENTATCLEARANCESSPECIFIEDBYTHEVENTMANUFACTURER.
ONLY USE APPROVED MATERIAL FOR INSTALLATION, FAILURE
TO DO SO MAY RESULT IN PROPERTY
DAMAGE,BODILYINJURY,OREVENDEATH.
Thisapplianceiscertifiedforusewithlisted3inchor4inch“PL”or“L”pelletventingproductsaswellas
Selkirk’s Direct‐Temp Vent system for pellet burning appliances.The use of other components other
thanstatedhereincouldcausebodilyharm,heaterdamage,andvoidyourwarranty.
To Next Page
Loading...
