Maintenance
Description
item No.
2DA/2DB
1-4-6
U003 Setting the service telephone number
Description
Sets the telephone number to be displayed when a service call code is detected.
Purpose
To set the telephone number to call service when installing the machine.
Method
Press the start key. The currently set telephone number is displayed.
Setting
1. Enter a telephone number (up to 15 digits) using the numeric keys.
Move the cursor using the left/right cursor keys and select a number or symbol using the up/down cursor
keys.
To enter symbols, press the keys shown below as required.
Key Symbol
∗ key ∗
# key #
Image mode selection key (
Aoto mode selection key )
Lighter key –
Darker key Space
2. Press the start key. The phone number is set, and the screen for selecting a maintenance item No. is
displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U004 Displaying the machine number
Description
Displays the machine number.
Purpose
To check the machine number.
Method
Press the start key. The currently machine number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
